Industrial Corrosion Control Products - Denso

Product finder

Not sure what you are looking for? Click here to get in contact

Clear all Filters

Archco 456

A Surface Tolerant Natural Gas Pipeline Flowliner

Industrial Storage Tanks Protection

Industrial storage tank corrosion can lead to structural weaknesses, increasing the risk of leaks, spills, and even catastrophic tank failure. This not only poses serious environmental and safety hazards but also results in costly repairs, cleanup efforts, and potential regulatory fines. Using Archco coatings and linings for industrial storage tanks offers significant corrosion prevention benefits […]

Pipeline Girth Weld Protection

Pipeline girth weld corrosion poses significant risks. Potentially leading to structural failures, leaks, and environmental contamination. Regular monitoring and maintenance are crucial to prevent catastrophic incidents and ensure the safety and integrity of any pipeline system. Denso’s liquid epoxy coatings (Protal) protect pipeline girth welds by offering a high-performance barrier that resists corrosion, even in […]

Trenchless and HDD Coating Protection

Horizontal directional drilling, boring and trenchless pipeline installation methods can severely damage your project’s coatings. These installation methods can easily gouge and shear the corrosion prevention coating applied to the substrate, allowing corrosion to happen. To avoid costly re-pulling of the pipe and having to shut down the installation process for spot repairs, Denso offers […]

Asphalt Joint Sealing Protection

Asphalt movement in parking lots, runways and roadways can lead to dangerous conditions, such as cracks, potholes, and uneven surfaces that pose hazards to vehicles and pedestrians. These issues can worsen over time, causing costly repairs and increasing the risk of accidents. Sealing asphalt to concrete joints with Denso Road Products offers durable and flexible […]

Pile Rehabilitation

Pile deterioration poses significant risks to the safety and stability of marine structures, leading to potential structural failures and hazardous conditions. As timber, concrete and steel piles weaken from corrosion, marine organisms, and or physical damage; the load-bearing capacity decreases, which can result in collapses or severe damage during storms, splash zone impacts and or […]

Potable Water Corrosion Protection

Potable drinking water is vital to any city and town. The infrastructure that stores and brings this precious water to people all around is just as vital and needs to be protected to. Denso, Inc. provides a corrosion protection product that keeps potable storage tanks and pipelines going and not turned off due to corrosion […]

Tie-Bar Protection System

Protection system for buried or exposed tie-bars, cables, macalloy bars and tendons.

Archco 426 Epoxy

archco

Ultra-High Solids Lining for Potable Water Pipes and Tanks

Viscotaq Tank Base Protection System

viscotaq tank base

Long-term corrosion prevention for above-ground storage tank chimes where the tank meets the concrete base.

Tank Base Protection System

viscotaq tank base

Long-term corrosion prevention for above-ground storage tank chimes where the tank meets the concrete base.

Cooling Tower Protection System

Long-term cooling tower corrosion prevention from wet/dry cycles and the environment.

Wastewater & Treatment Plant Corrosion Protection System

Denso-Low-Temperature-Petrolatum-Tape

Water and wastewater pipelines are buried throughout all major cities and rural areas and are in constant use. These integral pipelines are in constant use and need to be protected from corrosion to keep commodities running. Denso provides wastewater and treatment plant corrosion protection products to safeguard pipelines with our proven petrolatum tapes, sealing & […]

SeaShield FX-763 Epoxy

Trowel grade epoxy for top bevel

Denso Glass Outerwrap^™ HD

denso glassouterwrap hd

Protective Fiberglass Heavy-Duty Outerwrap

SeaShield Series FX-70

The SeaShield Series FX-70® features custom-made tongue-and-groove seamed fiberglass jackets that provide a corrosion-resistant protective shell for the life of the repair. High-strength, water-insensitive repair grouts and mortars are used to strengthen and protect damaged piles. These products displace existing water and can be easily pumped, tremied or poured into the SeaShield FX-70 jacket even […]

ViscoWrap Series

visco elastic pipeline rehabilitation

Amorphous, apolar, semi-solid, polyolefin coating

Viscotaq EZ Wrap Series

viscotaq ez wrap tank base

Visco-elastic coating with paintable backing.

ViscoMastic Series

Amorphus, apolar, visco-elastic, semi-solid, polyolefin mastic

ViscoSealant

viscotaq viscosealant tank chime sealing

Amorphous, apolar, visco-elastic, semi-Solid, polyoleﬁn sealant

Viscotaq Coating Patch

denso viscotaq coating patch

Visco-elastic repair patch

Viscotaq PE Outerwrap

viscotaq pe outerwrap 15 mechanical protection tape

All-purpose polyethylene protective tape

Viscotaq PVC Outerwrap

viscotaq pvc outerwrap polyvinyl chloride tape

All-purpose protective tape.

Denso Bore-Wrap®

denso bore wrap

A field-applied abrasion resistant outerwrap (ARO) Denso Bore-Wrap is an Abrasion Resistant Outerwrap (ARO) that has excellent performance against impact, gouge, abrasion, shearing, and fracture to protect anti-corrosion coatings during pipeline installations in difficult terrain or by means of trenchless installation methods such as directional drilling, HDD, or boring. Bore-Wrap creates an abrasion-resistant, sacrificial outer […]

Archco^™ Epoxy Tank Caulk

An epoxy caulk for surface transitions in storage tanks.

Archco 476 Series^™

A range of high performance two-part phenolic-novolac epoxies for lining of tanks and pipes.

Archco 466 Series^™

A range of glass flake epoxy coatings for high temperature and chemically aggressive environments.

Archco 460^™ Epoxy

A two-part epoxy phenolic with a wide range of chemical resistance.

Archco 453 Series^™

A range of high performance two-part epoxies for industrial storage, process tanks and pipelines.

Archco 381^™

A high-gloss hybrid exterior topcoat.

Archco 300^™ Primer

A two part epoxy primer for aboveground steel and concrete surfaces.

Denso Paste HT^™

A high temperature paste / primer which has superior high temperature performance up to 375˚F (190˚C).

Denso Butyl Primer

A butyl based primer used for Denso Butyl Tapes.

SeaShield 530^™ Injectable Epoxy

SeaShield 530 Injectable Epoxy application

SeaShield 530 Injectable Epoxy is an industrial & structural injectable epoxy for cracks and voids.

SeaShield 526^™ Epoxy

SeaShield 526 Epoxy application.

SeaShield 526 Epoxy is an underwater & trowel grade epoxy.

SeaShield FX-70TNG Epoxy Adhesive

SeaShield FX-70TNG Epoxy Adhesive application

SeaShield FX-70TNG Epoxy Adhesive is a two-part epoxy to adhere the tongue and groove on Fiber-Form jackets and other construction materials.

SeaShield 525^™ Epoxy

SeaShield 525 Epoxy is a coating for dry, damp, and wet surfaces.

SeaShield 520^™ Patch Repair

Vertical / Overhead Repair Mortar

SeaShield 520 Patch Repair is a fast setting vertical & overhead repair mortar.

SeaShield SZ^™ Underwater Epoxy Mastic

seashield system applications

An underwater splash zone epoxy mastic.

SeaShield 510^™ Underwater Grout

Applying Seashield 510 underwater grout

SeaShield 510 is a non-shrink underwater cementitious grout.

SeaShield 550^™ Epoxy Grout

SeaShield 550 Epoxy Grout preparation

SeaShield 550 Epoxy Grout is a multipurpose marine epoxy & epoxy grout for pile encapsulation and repair.

Fab-Form

A fabricated nylon ballistic fabric jackets or custom fabricated bags.

Fiber-Form

A custom fabricated fiberglass jackets. Shapes: Cylindrical, Square, H-Pile, Octogonal and Custom

SeaShield Series 500^™

SeaShield 500 in an aggresive marine environment

A heavy-duty fiberglass jacket pile protection system with epoxy grout.

SeaShield Series 400^™

SeaShield 400 applied to underwater piles

A non-corrosive structural repair for timber piles.

SeaShield Series 90^™

timber pile protection

A timber pile protection system with petrolatum tape and HDPE outercover.

SeaShield Series 70^™

Application of SeaShield Series 70 on piles

A two component system of petrolatum tape and fiberglass outerwrap to protect timber, steel & concrete piles.

SeaShield Series 160^™

SeaShield 160 on boardwalk piles

A timber pile protection system.

SeaShield Series 100^™

SeaShield 100 on boardwalk piles

A medium-duty, multi-layered system, featuring a durable HDPE outer jacket secured with a strapping system, for the protection of concrete, timber and steel piles that are round, square, hexagonal or H-piles.

SeaShield Series 2000HD^™

steel pile protection

A heavy-duty, multi-layered system, featuring a durable HDPE outer jacket with a bolted connection, for the protection of concrete & steel piles that are round, square, hexagonal or H-piles.

Protal Spray & Repair Cartridges

Repair and Spray cartridges for Protal 7200, 7125 and 7900HT.

Protal 650 CTR^™

Environmentally friendly alternative to coal tar epoxy.

Archco 65^™

denso archco

A high solids, two-part aliphatic polyurethane.

Archco 15^™

High build flexible water based acrylic topcoat.

Denso Bitumen Mastic

denso bitumen mastic

A high build single component bituminous mastic.

Protal ST Epoxy Mastic

A two-part, surface tolerant liquid epoxy glass flake coating.

Protal 7000

High build pipeline coating – brush grade.

Densotherm Tape

Densotherm Tape is a hot applied bituminous tape. It is comprised of a non-woven synthetic fabric fully impregnated and coated with a flexible, high melting point bitumen compound.

Densopol 60 & 60HT Tape

Densopol 60 & 60 HT is a cold applied heavy duty bitumen tape with synthetic fabric reinforcement coated with rubber bitumen adhesive and backed with a PVC film.

Butyl 35 Tape

Bitumen Butyl Tape Coatings

Denso Butyl 35 Tape is a polyethylene backed tape with a butyl rubber adhesive.

Industrial Tank Base Sealant Tape

industrial tank base sealant tape

Denso FB 30 Tape is a butyl rubber adhesive tape with a polyester fabric backing. The tape can be top-coated with Archco 15TM.

Denso Butyl 30 Tape

protective pipeline tape

A butyl adhesive tape with a UV resistant polymer backing.

Denso Re-Instatement Tape

Denso Re-Instatement Tape application to existing asphalt

Denso Re-Instatement Tape is a cold applied polymer modified bituminous strip for sealing joints between existing asphalt and new asphalt installations.

Denso Rock Shield

A protective pipeline mesh to protect a pipeline’s coating from damaging rock backfills, protrusions and abrasions. Standard Duty (SD) – 0.14 inch thick Heavy Duty (HD) – 0.44 inch thick Heavy Duty with Geotextile Backing (HDX) – 0.44 inch thick

Denso FRP Spacers

FRP Spacer to protect coatings from abrasion at pipe supports.

A fiberglass spacer or shield that protect pipes from abrasions, at the touch points.

Denso Poly-Wrap

A high performance outerwrap compression film.

Denso Glass Outerwrap UV^™

An UV protective fiberglass outerwrap with exceptional mechanical and impact strength for underwater, underground, and above ground pipe and piles.

Denso Covercoat^™ System

Protective encasement system for column bases

A corrosion protection encasement system for column bases and other steel structures.

Denso WB^™ Tape – Non-leaching Wax Tape

Hi-Tack petrolatum wax tape with polymer backing

Denso WB Tape is a hi-tack petrolatum tape that provides additional protection with a thin polymer backing.

Denso ColorTape^™

Denso ColorTape used to protect steel surface

A primer integrated petrolatum wax tape that is available in standard grey.

Denso^™ Tape – draft

Denso Tape sealing bolted pipe flanges

Our renowned multi-purpose, surface tolerant petrolatum tape for corrosion prevention on steel pipes, fittings and structural steel.

Densyl^™ Tape

Densyl Tape applied to pipeline

Densyl Tape is a multi-purpose, surface tolerant, corrosion protective petrolatum tape (also known as wax tape) that provides long-term corrosion protection of steel pipes, flanges, valves, fittings, and other related surfaces ranging from the arctic to tropical temperatures.

Densyl KF^™ Tape

Densyl KF Tape

A fire-retardant petrolatum tape for above and below ground corrosion prevention of steel pipes and fittings. Provides long term corrosion protection to pipes, flanges, valves and related surfaces.

Denso Hotline^™ Tape – High Temp Wax Tape

Denso Hotline Tape high temp petrolatum wax tape application

Denso hotline tape is a petrolatum wax tape for high service operating temperatures, up to 230˚F (110˚C).

Denso LT^™ Tape – Low Temp Wax Tape

Denso LT Tape applied to wastewater pipelines in arctic temperatures

Denso LT Tape is a multi-purpose, surface tolerant (wet & dry), moisture resistant petrolatum wax tape for corrosion prevention of steel pipes and fittings in low-temperature environments down to -40˚F (-40˚C).

Denso High-Tack^™ Tape

Denso Hi-Tack Tape applied to Gantry Crane

A high adhesive tape petrolatum tape for the protection of above ground steelwork.

Denso Marine Piling Tape^™

Large diameter marine steel pile being protected from splashzone corrosion with Denso products

Denso Marine Piling Tape is a petrolatum tape with an HDPE backing for use in the marine environment. It is not effected by water, acid or salts and is great for protecting timber, steel & concrete piles as well as submerged pipe works or other surfaces in contact with water.

Densopol^™ Tapes

Densopol Tape applied to pipeline

High performance, reinforced rubber bitumen tapes for below ground pipeline corrosion prevention.

SeaShield 2000 FD System^™

SeaShield 2000 FD applied to jetty piles

The SeaShield Series 2000 FD is a heavy-duty, multi-layered system, featuring a durable HDPE outer jacket for large diameter pile protection including concrete & steel that are round, square, or hexagonal in shape.

SeaShield Inspection Port^™

SeaShield inspection port open to allow an inspection of the pile surface below

An optional addition to the SeaShield Series 2000HD™ or SeaShield Series 2000FD™, the patented Inspection Port allows for rapid inspection of the substrate without requiring removal of the entire system.

SeaShield 70^™ System

SeaShield 70 system protecting marine piles

A durable tape wrap system for the protection of unevenly shaped steel, timber or concrete jetty piles.

SeaShield Rigspray^™ – Steel Pile Coating

SeaShield Rigspray on marine piles

A single coat, liquid coating system for the protection of steel piles and structures in aggressive marine environments.

Protal 7300^™

A versatile, moisture tolerant pipeline liquid epoxy coating that can be coated on dry, damp or wet surfaces. It has excellent CD, gouge, abrasion and impact resistance properties.

Protal 7200^™

Protal 7200 being brush applied to a pipe section

A high build, fast cure pipeline liquid epoxy coating used to coat girth welds, tie-ins, HDD, fittings and fabrication.

Protal^™ Cartridges

A Protal cartridge being used to repair a damaged pipe coating section

Conveniently sized cartridges for Protal products.

Protal^™ Repair Kits

A Protal Repair Kit is used to repair a damaged area in the Protal coating.jpg

Repair kits for the range of Denso Protal™ Epoxy coatings.

Protal ARO^™

Protal ARO applied to a steel pipe section.jpg

An abrasion resistant pipeline coating for the protection of FBE mainline coatings in rough terrain applications.

Protal 7900HT^™

Protal 7900HT being spray applied to a pipe section

A fast curing, high build liquid phenolic novolac epoxy coating designed for pipelines running at elevated operating temperatures.

Protal 600 CTE^™

Protal 600 CTE being applied to steel sheet piling.jpg

A two-part high build coal tar epoxy that can be applied as a single or two-coat system to protect steel or concrete substrates.

Protal 600 CTE LOW VOC^™

Protal CTE Low VOC applied to pipe lengths

A two-part high build coal tar epoxy that has low VOC and can be applied as a single or two-coat system to protect steel or concrete substrates.

Protal 7125^™

Protal 7125 being applied to a girth weld

A fast-curing, high-build liquid coating designed for low-temperature environments and substrates. Winter Grade. It can be applied in-service or during pipeline construction in the field.

Denso PVC Tape^™ (Colored)

Denso PVC Self-Adhesive Tape protective outerwrap for Denso Tapes

A colored polyvinyl chloride (PVC) tape coated on one side with a rubber resin pressure sensitive adhesive.

Denso Glass Outerwrap^™

Denso Glass Outerwrap is a heavy duty protective outerwrap for Denso Tapes.jpg

A protective fiberglass outerwrap with exceptional mechanical and impact strength for underwater, underground, and above ground pipe and piles.

Archco 400 Series^™

Archco 400 used to line steel or concrete pipes and tanks

A range of two-part epoxy phenalkamine primers and linings for the effective protection of internal steel pipes and tanks.

Archco 453^™ Epoxy – Pipe Lining

Archco 453 Epoxy used as a resistant lining for steel and concrete pipes and tanks.JPG

An extremely durable epoxy lining for the effective protection of industrial tank and pipe internals. Excellent temperature resistance up to 200°C.

Archco 466^™ Epoxy – Pipe Lining

Archco 466 Epoxy used as a resistant lining for pipes and tanks

A glass flake epoxy lining designed for use in chemically aggressive environments.

Densoband^™

Densoband used to seal vertical joints between ashphalt, concrete and steel in road repair and construction

A hot asphalt bituminous sealing strip for sealing joints between asphalt & asphalt, asphalt & concrete and asphalt & road castings in road & pavement construction and maintenance.

Densoseal 16A^™

Densoseal 16A used to seal ducts and service entries from the ingress of gas and water

A self-supporting and non-setting mastic for sealing cable entries and ducts.

Denso Void Filler^™

An injectable petrolatum compound that fills voids and encapsulates pipes and cables.

Denso Profiling Mastic^™

A self-supporting, low-density petrolatum mastic for molding and filling irregular profiles.

Densyl^™ Mastic

Densyl Mastic is used to smooth profiles before wrapping with Denso Tapes

A self-supporting petrolatum mastic for molding and filling irregular profiles.

Denso Paste^™

Denso Paste

A soft paste, a petrolatum tape primer, for the preparation of metal surfaces prior to the application of Denso™ petrolatum tapes.

Denso Hi-Tack^™ Primer

Denso Hi-Tack Primer used on Steelwork before application of Steelcoat System

A tacky, adhesive primer for use with Denso Hi-Tack™ Tape and other petrolatum tapes.

Denso Paste S105^™

Denso Paste S105

A soft brown paste primer for use wet underwater surfaces prior to applying Denso™ petrolatum tapes

Denso Primer D^™

Denso Primer D applied to pipe weld before application of Densoclad Tape

A bitumen based primer for use with Denso™ Bitumen Tapes.

Densoband^™ Primer

Densoband Primer used on joint surfaces before applying Densoband

A bitumen primer for use with Densoband™ and associated Denso™ road repair products.

Not sure what you are looking for? Click here to get in contact