Archco 426 Epoxy
Ultra-High Solids Lining for Potable Water Pipes and Tanks
Uses
- Potable water fittings, valves, meters, and pumps (6″ diameter and greater)
- Potable water storage tanks (>10,000 gallons)
- Potable water pipes (36″ diameter and greater)
- Immersion service in fresh and salt water
Archco 426 Epoxy is a two-part, ultra-high solids, low-VOC, drinking water safe epoxy lining for immersion service in potable water pipes, towers, and storage tanks. It does not require induction and may be applied in one or two coats.
- Meets or exceeds AWWA C210
- Approved to standard NSF/ANSI/CAN-61 & 372 for potable water
- No induction time required
- No primer required, apply direct to surface
- One or two coat protection
- High solids (>98 vol% solids)
- Low VOC/HAPS (<0.1 lbs/gal / 15 g/L)
- Suitable for use in SCAQMB restricted area
-
Archco 426 Epoxy - TDS
datasheet
-
Corrosion Protection For Potable Water Tanks & Pipes - Archco 426
literature
