Denso Corrosion Protection Linings and Coatings

Archco 476 Banner

For Technical Data Sheets, please click on our Online Catalog

Skip Navigation LinksHome Page : Products : Tank Protection

Denso Archco Linings - Internal Linings & External Coatings for Corrosion Control

The Archco system provides linings and coatings corrosion protection for: Crude, Gas & Diesel Tanks, Ethanol Tanks, Petrochemical Tanks, Heat Exchangers, Knock Out Drums, Chimes Areas, Bund Areas, Pressure Vessels and Internal Pipes & Valves.

Archco Linings Brochure

Archco Pipe Lining Brochure

Protal 600 CTE & CTE Low VOC Brochure

Archco 300 Primer

Two Part Epoxy Primer

A low VOC, two component coating that provides excellent protection on aboveground steel and concrete surfaces.

Archco 310 Primer

Two Part Organic Zinc Primer

An organic zinc rich epoxy polyamide primer for protection of steel. It has excellent performance in salt and heavy weathering environments.

Archco 320 Primer

Two Part Inorganic Zinc Primer

An inorganic zinc rich epoxy polyamide primer for protection of steel. It has excellent performance in salt and heavy weathering environments.

Archco 400 Epoxy

Two Part Epoxy Phenalkamine for Internal Tank

Archco 400 Epoxy is a two-part epoxy-phenalkamine system designed as an internal tank lining and primer with superior wet-out properties. The system has excellent low-temperatures cure properties.

Archco 400HB Epoxy

High Build Two Part Phenalkamine Epoxy for Internal Tank Linings

Archco 400HB Epoxy is a 85% solids two-part epoxy designed for internal tank linings. The coating has excellent low temperatures cure properties.

Archco 401 Epoxy

Penetrating Primer

A two-part, 100% solids epoxy system designed to be applied over heavily pitted tank floors requiring sealing prior to overcoating with Archco lining systems.

Archco 403D

Vinyl Ester Glass Flake Coating

Corrosion protection for oil storage tank linings, filtration vessels, ion exchange vessels, effluent streams and water treatment facilities. Also, used for the protection of process vessels, stacks, ducts, fume scrubbers, fan cases and many other corrosive environments.

Archco 420 Epoxy

Low Permeability, MIC resistance & Acid-Resistant Protective Lining

Archco 420 Epoxy is a two-part, high solids, modified epoxy lining provide ultra-low permeability. It has excellent resistance to microbial-induced corrosion (MIC) and acids.

Archco 436 Epoxy

Epoxy Coating for Internal Pipe Lining

Archco 436 Epoxy is a multi-purpose, surface tolerant, two-part, epoxy coating system designed for internal pipe coatings..

Archco 453 Epoxy

Two-Part Epoxy for Industrial Storage and Process Tanks and Pipelines

Archco 453 is a 70% solids, two-part, epoxy phenolic novolac system designed to produce a lining with excellent chemical and temperature resistance over a wide range of temperatures and pressures.

Archco 453HT Epoxy

Internal Epoxy Phenolic-Novolac Lining for Tanks and Pipes

An 88% or 100% solids, two-part, epoxy-phenolic novolac system designed for internal tank linings. With excellent chemical and temperature resistance over a wide range of temperatures and pressures.

Archco 453HT Plural

Heat Resistant Coating - Plural

A high solids, fast curing, technologically advanced epoxy-phenolic novolac lining. It is specifically designed to handle the harsh environments in the petroleum industry, including all petroleum crudes.

Archco 453HT Airless

Heat Resistant Coating Single-Leg

A high solids, fast curing, technologically advanced epoxy-phenolic novolac lining. It is specifically designed to handle the harsh environments in the petroleum industry, including all petroleum crudes.

Archco 453HT Epoxy Caulk

Heat Resistant Coating Epoxy-Phenolic Novolac Caulk

An ultra-high solids, fast curing, technologically advanced epoxy-phenolic novolac caulk. It is specifically designed to handle the harsh environments in the petroleum industry, including all petroleum crudes.

Archco 453HTP Epoxy

Abrasion Resistant Internal Epoxy Phenolic-Novolac Lining for Pipes

A two-part, high-temperature resistant, epoxy phenolic-novolac system designed for internal pipe linings requiring excellent chemical and temperature resistance over a wide range of temperatures and pressures.

Archco 454HT Epoxy

High Temperature Internal Epoxy Phenolic-Novolac Lining for Vessels and Pipes

An 83% solids, two-part, high temperature resistance, epoxy-phenolic novolac system designed for internal vessel linings. With excellent chemical and temperature resistance over a wide range of temperatures and pressures.

Archco 460 Epoxy

Two Part Epoxy Phenolic

Archco 460 Epoxy is a two-part high solids epoxy phenolic designed for internal tank and pipe linings.

Archco 466 Epoxy

Glass Flake Epoxy Coating for High Temperature and Chemically Aggressive Environments

A multi-purpose, two-part, epoxy phenolic novolac coating system designed for applications requiring excellent chemical resistance to oil products, acids (sulfuric and hydrochloric), solvents, inorganic salts and water.

Archco 466P Epoxy

Glass Flake Epoxy Coating for Down Hole Interior Tubulars High Temperature and Chemically Aggressive Environments

A multi-purpose, two-part, epoxy phenolic novolac coating system designed for applications requiring excellent chemical resistance to oil products, acids (sulfuric and hydrochloric), solvents, inorganic salts and water.

Archco 467 Epoxy

Dry Heat Resistant Glass Flake Epoxy Coating for High Temperature and Chemically Aggressive Environments

A multi-purpose, two-part, epoxy phenolic novolac coating system designed for applications requiring excellent chemical resistance to oil products, acids (sulfuric and hydrochloric), solvents, inorganic salts and water. Dry heat resistance up to 500°F (260°C) and up to 400°F (203°C) service depending on the fluids present.

Archco 476 Epoxy

85% Solids High Temperature Internal Epoxy Phenolic-Novolac Lining for Tanks and Pipes – Single-Leg Airless

Archco 476 Epoxy is a two-part, high-temperature resistant, epoxy phenolic-novolac system designed for internal tank linings requiring excellent chemical and temperature resistance over a wide range of temperatures and pressures. It is a 85% solids system for single-leg airless component spray applications.

Archco 476F Epoxy

Thick-Film Reinforced Epoxy Phenolic-Novolac Tank Lining

A 100% solids, two-part, high-temperature resistant, epoxy phenolic-novolac system designed for internal tank linings and pipes.

Archco 476 LT Epoxy

A Low Temperature Cure Version of Archco 476

Archco 476 LT Epoxy is a two-part, high-temperature resistant, epoxy phenolic-novolac system designed for internal tank linings requiring excellent chemical and temperature resistance over a wide range of temperatures and pressures. It is designed for plural-component spray applications at low ambient temperatures and / or where fast return to service is required.

Archco 476P Epoxy

100% Solids High Temperature Internal Epoxy Phenolic–Novolac Lining for Tanks and Pipes – Plural Component

A two-part, high-temperature resistant, epoxy phenolic-novolac system designed for internal tank linings requiring excellent chemical and temperature resistance over a wide range of temperatures and pressures. It is a 100% solids systems for plural component spray applications.

Archco 480 Epoxy

Epoxy Lining for Ethanol Tanks

Archco 480 Epoxy is a 100% solids, two-part, epoxy cycloaliphatic-amine system designed for fast-return-to-service, internal tank linings. The coating has excellent, low-temperature cure properties and resistance to ethanol.

Archco Epoxy Tank Caulk

Two Part Caulk Epoxy for Internal Storage Tanks

Archco Epoxy Tank Lining is a 100% solids, hand-applied epoxy caulk designed for sealing of rivets and smoothing of seams in storage tanks.

Denso Weathershield 55

High Build Flexible Acrylic Topcoat

Is a single part, high build, high performance acrylic topcoat with excellent adhesion.

Denso Weathershield 65

High Solids Aliphatic Polyurethane

Used as a topcoat over Protal Liquid Coatings to provide color coding, abrasion resistance, chemical resistance and UV stability. Will cure at temperatures as low as 40°F (4°C).

Archco Vinyl Wash Primer

Coating for Aluminum and Galvanized Metal Surfaces

A two-part, chemical and corrosion-resistant coating designed for aluminum and galvanized steel surfaces.

Protal 600 CTE

High Build Coal Tar Epoxy

A two-part high build coal tar epoxy. It is a polyamide with excellent abrasion and chemical resistance.

Protal 600 CTE Low VOC

A Low Volatile Organic Compound High Build Coal Tar Epoxy

A two-part high build coal tar epoxy that has low VOC's. It can be applied as a single or two-coat system.

Protal 650 CTR

Environmentally Friendly Alternative to Coal Tar Epoxy

A two-part product formulated to replace coal tar epoxy. It is based on phenalkamine chemistry designed as an alternative to hazardous coal tar epoxies.

Tank Base and Chime Protection System

Employing a series of tapes and coatings, Denso's Tank Base and Chime Protection System will help seal gaps at the base to protect the tank from further corrosion at these vulnerable areas and shield it from environmentally corrosive agents.

Tank Base Protection System - Layered Tape System to Protect the Chime Area From Corrosion
Corrosion protection system that protects the tank base and chime area by sealing gaps on the concrete / metal base where water and air normally penetrate to corrode the tank base.