Denso SeaShield Marine Systems
For Technical Data Sheets, please click for our Catalog.
A full range of steel, concrete, timber and steel sheet pile rehabilitation and corrosion protection systems from splash zone
corrosion, which includes petrolatum tapes, wax tapes, fiberglass jackets, splash zone epoxy grouts and many other products.
SeaShield Brochure
Protal 600 CTE & CTE Low VOC Brochure
Specification Guides
Steel and Concrete Pile Protection System
An anti-corrosion protection system using a proven petrolatum tape with over a 35-year
history. The SeaShield Marine Tape is protected with a durable HDPE outercover secured
with marine grade alloy bolts.
Ultimate Steel and Concrete Pile Protection System
An anti-corrosion protection system for medium to large piles using a proven petrolatum
tape with over a 35-year history. The SeaShield Marine Tape is protected with a
durable HDPE outercover secured with marine grade alloy bolts.
Steel, Concrete and Timber Pile Protection System
An anti-corrosion protection system using a proven petrolatum tape with over a 35-year
history. The SeaShield Marine Tape is protected with a durable outercover secured
with a selected strapping for the type of environment.
Timber Pile Protection System
Series 160 System protects timber piles from marine borer infestation and mechanical damage. The outercover made, of 180 mil HDPE,
is extrusion manufactured at 16", 18" and 20" in diameter thereby creating a snug fit around timber piles from 10" to 18" in diameter.
Durable Fiberglass Wrap System for Steel, Concrete & Timber Piles
A durable fiberglass wrap system that consists of an inner wrap of Denso Marine Piling Tape and outer wrap of Denso Glass Outerwrap or Glass Outerwrap UV.
Timber Pile Protection System
A durable outercover used with SeaShield Marine Tape for protection against marine
borers. The system can be manufactured with polyethylene, PVC or EPDM.
Non-Corrosive Structural Repair for Timber Piles
Comprised of the SeaShield Fiber-Form Jacket, C-GRID® 450 and SeaShield 510
UW Grout or Sea-Shield 550 Epoxy Grout. The Series 400 is a revolutionary encapsulation
system that not only protects timber piles from aggressive saltwater environments
and marine borers, but also strengthens deteriorated piles with a durable, lightweight
and non-corrosive reinforcement.
Steel, Concrete and Timber Pile Protection System
An anti-corrosion protection systems comprised of the SeaShield Fiber-Form Jacket
and SeaShield 550 Epoxy Grout. This system can be applied above and/or below water
providing tough, durable protection to restore steel, concrete and timber piles.
Custom Fabricated Fiberglass Jacket
Fiber-form are fiberglass jackets that are specifically designed for protection
and rehabilitation of steel, concrete and timber piles. The jackets can be manufactured
to a specific color or translucent with a tongue and groove closure system.
Custom Fabricated Fabric Jacket
Fab-Forms are an economic solution to repair deteriorated steel, concrete and timber
pilings. The forms are a 100% continuous multifilament nylon fabric with a zipper
closure system.
Encapsulation and Repair Grout
A three component water displacing epoxy resin/aggregate formulation which provides
a durable, well bonded repair to concrete and steel above and below water.
Underwater Grout
A non-shrink cementitious grout designed to resist "wash-out" in underwater or tidal
zone grouting applications.
Underwater SplashZone Epoxy Mastic
Solvent-free patching compound used for repairing pits, cracks and voids in steel,
concrete, wood and other surfaces. SeaShield SZ Underwater Epoxy has the unique
ability to be mixed, applied and cured underwater. (Previously named SeaShield SplashZone UW Epoxy)
Fast Setting Vertical and Overhead Repair Mortar
A single component, Portland Cement based, polymer modified material designed to repair and rehabilitate vertical and overhead concrete and masonry surfaces without the need for costly form work.
Epoxy Coating for Dry and Wet Surfaces
SeaShield 525 Epoxy is a 100% solids two part, moisture tolerant, non-sag, high build epoxy designed for dry, damp and wet surfaces. It
can be used for steel concrete and wood structures.
Two Part Fiberglass Form Tongue and Groove Epoxy
100% solids epoxy formulated to be injected into the fiberglass form tongue and groove to provide superior adhesion.
Underwater and Trowel Grade Epoxy
100% solids two part, moisture tolerant, non-sag, high build epoxy designed for underwater applications. It can also be used for aboveground applications
including top seal and beveling of pile caps.
Injectable Epoxy for Cracks and Voids
A modified two component epoxy for large cracks/voids and formulated to produce low exotherm.
Polyester Glass Flake Coating
Two-part high solids reinforced glass flake coating with outstanding resistance
to corrosion and abrasion. It is resistant to corrosive acids, alkalis, salts and
a range of oxidizing chemicals. Corrosion protection of steel structures that are
subject to the most aggressive marine environments (i.e., pilings, bulkheads, helidecks,
splash zones, underdeck areas, main deck areas, and many other corrosive environments).
Environmentally Friendly Alternative to Coal Tar Epoxy
A two-part product formulated to replace coal tar epoxy. It is based on phenalkamine chemistry designed as an alternative to hazardous
coal tar epoxies.
High Build Coal Tar Epoxy
A two-part high build coal tar epoxy. It is a polyamide with excellent abrasion and chemical resistance.
A Low Volatile Organic Compound High Build Coal Tar Epoxy
A two-part high build coal tar epoxy that has low VOC's. It can be applied as a single or two-coat system.